What Kind Of Paint Do You Paint Exterior Steel Doors With
- Painting
How To: Paint a Metallic Door
Metal doors offer great benefits in security and atmospheric condition resistance, but to continue their surfaces welcoming and rust-free, you take to go along up with the painting. Hither'due south how to burnish up a worn, scratched, or just tired-looking metallic door with a fresh coat of paint.
Photo: Zillow Digs home in Seattle, WA
Steel doors are wonderful at keeping the air current and conditions out of our homes, and they're remarkably durable—they can last a lifetime. The pigment that covers them, yet, volition not final that long. So, if your business firm has a metal door, at some point you'll be faced with repainting it. As with whatever painting project, the terminal results volition be straight impacted past your preparation, but information technology'due south not an especially difficult DIY.
- Remove the door, if possible, and cover whatsoever parts of the door you practise non wish to pigment.
- Thoroughly clean the door with a degreaser.
- Lightly sand the door, and so wipe it downwardly to remove any lingering dust.
- Apply the first coat of primer and let dry out. (Apply a second coat of primer if necessary)
- Apply at least two coats of exterior satin or semi-gloss pigment.
- Allow paint dry completely, so rehang door.
Continue reading for full project details on how to paint a metal door.
- Screwdriver
- Hammer
- Sawhorses
- Degreasing cleaner
- Sponge
- Fine-grit sandpaper
- Come across full list «
- Dust mask
- Rubber goggles
- Painter's tape
- Exterior primer
- Satin exterior paint
- Trim-size paint roller
- Curt-nap roller cover
- Paint tray
- Pocket-size paintbrush
Safe note: Before you dig in, notation that doors painted prior to 1978 are likely to take pb-based paint on them. If your door does have lead-based pigment, follow EPA guidelines for removal. If y'all accept any question, have the paint tested prior to beginning this project.
Photo: homedepot.com
Footstep 1: Remove the door, if possible.
Before you become started, know that pigment drying times and environmental factors tin turn this into a multiday project. If yous tin can't secure your domicile without the door, you'll need to pigment it in place, which may have fifty-fifty longer. But if you can remove the door without compromising your home security, identify a screwdriver under the head of the hinge pin and lightly tap it with a hammer until you're able to pull it out. Echo with the other hinges, and remove the door.
Step ii: Remove hardware and protect areas you do not wish to paint.
Begin by prepping the door for painting. Once you've taken the door off its hinges, lay it across 2 sawhorses or on a big, flat surface. Take off whatever removable weatherstripping, and apply painter's tape over any hinges or hardware. Protect kickplates or windows that tin't exist removed by taping newspaper over them.
Step 3: Clean the door thoroughly with a degreaser.
Wash the entire door thoroughly with a degreasing cleaner according to the manufacturer's instructions, then dry the door with a towel.
Stride 4: Lightly sand the door.
Put on your dust mask and safety glasses and go over the door lightly with fine-dust sandpaper (or a sanding cake) to rough up the surface and remove any loose paint.
STEP 5: Remove all sanding dust and lingering debris.
Wipe down the entire door to remove all the dust from sanding, and allow the door to completely air-dry.
Pace 6: Apply primer.
If your door has a smoothen surface, roll on your showtime coat of primer with a short-nap roller, and let it dry. If your door has recessed panels, kickoff by using a small castor to prime number the inside panels first, then whorl primer onto the mullion (the vertical section between the panels), and finally onto the rail (the horizontal pieces between the panels) and outside edges. Allow the primer to dry out according to the manufacturer's instructions, and utilise a 2d coat, if necessary, the same way yous did the outset.
Step 7: Add two coats of paint, letting each dry completely.
Paint the door with at least ii coats of exterior satin or semi-gloss paint, following the same procedure you did for the primer and being sure to leave the recommended corporeality of drying time between coats.
Note: If yous have to paint the door while it's on its hinges, plan to work over a stretch of days when at that place is no rain in the forecast. Prep the door one day, then start your outset glaze of primer brilliant and early on the next forenoon. If you start early enough, you should have time for the paint to dry before y'all close the door for the dark. Get going on the second glaze the start thing the next morning time, with the goal of its being dry by nighttime. Go along in this manner until you've applied equally many coats as are necessary.
Pace viii: Remove tape, replace hardware, and rehang door.
After the pigment has dried completely, carefully remove the painter'south tape and supercede whatever hardware or weatherstripping you removed. Finally, rehang the door.
It's astonishing how a fresh coat of pigment on a door tin can really elevator the spirits of an entire facade. If you allow time for careful preparation and sufficient drying, your rejuvenated front end door will expect nifty and welcome visitors for years to come.
Source: https://www.bobvila.com/articles/how-to-paint-a-metal-door/
Posted by: sandersoundes.blogspot.com
0 Response to "What Kind Of Paint Do You Paint Exterior Steel Doors With"
Post a Comment